Bodytone Commercial Chest Press

  Bodytone Commercial Chest Press 

FRAME

Steel tube of 110 x 52 mm with 3 mm thickness. Welded according to UNE 10219 regulation. Enriched and optimized to maintain a constant section in the bending process, avoiding more sensitive areas with a low breaking rate. Cold bending process, by means of a 4-roller system; avoiding any deformation in the process and maintaining their physical characteristics in the whole piece.

PAINTING PROCESS

3 layers of paint. Steel pickling and stabilized by immersion of the parts in different degreasing solutions to ensure a perfect and complete cleaning of the base material. Antioxidant primer to ensure adequate isolation of internal oxidation and good paint adhesion. 2 final coats of epoxy polyester powder paint, dried at 240ºC.

ASSEMBLING PROCESS

10 mm Plate-against-Plate system, to avoid looseness and torsion in maximum effort areas. Ergonomic and biomechanical research optimized for every exercise

BACK & SEAT PADS

Leather simile perspiration resistant, antibacterial and antiallergenic. Back pad, seat pad and rolls in polyurethane foam 80 kg/m3 density that provides an optimum support for your training and a uniform contact. Resistant to deformation.

HANDLES

Anodized ALUMINUM, knurled for better grip.

ADJUSTMENTS

Adjustable Seat by pop-pin. Regulation system by a single bolt, made of techno-polymer with a breakage index of 750 kg.

OTHER INFORMATION

6 plate supports in chromed steel, which provides more stability to the machine. Rubber endings of 20mm thickness for plates. Rubber endings of 50mm thickness to support moving parts. independent, converging and diverging movements to simulate the feeling of using free weights. 4 anti-slip bases.