Bodytone Commercial Flat Bench Press

  Bodytone Commercial Flat Bench Press 

FRAME

Steel tube of 110 x 52 mm with 3 mm thickness. Welded according to UNE 10219 regulation. Enriched and optimized to maintain a constant section in the bending process, avoiding more sensitive areas with a low breaking rate. Cold bending process, by means of a 4-roller system; avoiding any deformation in the process and maintaining their physical characteristics in the whole piece.

PAINTING PROCESS

3 layers of paint. Steel pickling and stabilized by immersion of the parts in different degreasing solutions to ensure a perfect and complete cleaning of the base material. Antioxidant primer to ensure adequate isolation of internal oxidation and good paint adhesion. 2 final coats of epoxy polyester powder paint, dried at 240ºC.

ASSEMBLING PROCESS

10 mm Plate-against-Plate system, to avoid looseness and torsion in maximum effort areas. Ergonomic and biomechanical research optimized for every exercise

BACK & SEAT PADS

Leather simile perspiration resistant, antibacterial and antiallergenic. Back pad, seat pad and rolls in polyurethane foam 80 kg/m3 density that provides an optimum support for your training and a uniform contact. Resistant to deformation.

HANDLES

Anodized ALUMINUM, knurled for better grip.

ADJUSTMENTS

Adjustable Seat by pop-pin. Regulation system by a single bolt, made of techno-polymer with a breakage index of 750 kg.

OTHER INFORMATION

3 anti-slip bases. 6 positions for adjusting the inclination of the backrest. 2 position for adjusting the inclination of the seat. Wheels for easy transport.