- 12 Months Interest Free$50.13 / Week
This is an estimate only. Terms and Conditions apply.
Stock Availability
Bodytone Commercial Incline Chest Press
FRAME
Steel tube of 110 x 52 mm with 3 mm thickness. Welded according to UNE 10219 regulation. Enriched and optimized to maintain a constant section in the bending process, avoiding more sensitive areas with a low breaking rate. Cold bending process, by means of a 4-roller system; avoiding any deformation in the process and maintaining their physical characteristics in the whole piece.
PAINTING PROCESS
3 layers of paint. Steel pickling and stabilized by immersion of the parts in different degreasing solutions to ensure a perfect and complete cleaning of the base material. Antioxidant primer to ensure adequate isolation of internal oxidation and good paint adhesion. 2 final coats of epoxy polyester powder paint, dried at 240ºC.
ASSEMBLING PROCESS
10 mm Plate-against-Plate system, to avoid looseness and torsion in maximum effort areas. Ergonomic and biomechanical research optimized for every exercise
BACK & SEAT PADS
Leather simile perspiration resistant, antibacterial and antiallergenic. Back pad, seat pad and rolls in polyurethane foam 80 kg/m3 density that provides an optimum support for your training and a uniform contact. Resistant to deformation.
HANDLES
Anodized ALUMINUM, knurled for better grip.
ADJUSTMENTS
Adjustable Seat by pop-pin. Regulation system by a single bolt, made of techno-polymer with a breakage index of 750 kg.
OTHER INFORMATION
2 plate supports in chromed steel, which provides more stability to the machine. Rubber endings of 20mm thickness for plates. 5 anti-slip bases.
FRAME
Steel tube of 110 x 52 mm with 3 mm thickness. Welded according to UNE 10219 regulation. Enriched and optimized to maintain a constant section in the bending process, avoiding more sensitive areas with a low breaking rate. Cold bending process, by means of a 4-roller system; avoiding any deformation in the process and maintaining their physical characteristics in the whole piece.
PAINTING PROCESS
3 layers of paint. Steel pickling and stabilized by immersion of the parts in different degreasing solutions to ensure a perfect and complete cleaning of the base material. Antioxidant primer to ensure adequate isolation of internal oxidation and good paint adhesion. 2 final coats of epoxy polyester powder paint, dried at 240ºC.
ASSEMBLING PROCESS
10 mm Plate-against-Plate system, to avoid looseness and torsion in maximum effort areas. Ergonomic and biomechanical research optimized for every exercise
BACK & SEAT PADS
Leather simile perspiration resistant, antibacterial and antiallergenic. Back pad, seat pad and rolls in polyurethane foam 80 kg/m3 density that provides an optimum support for your training and a uniform contact. Resistant to deformation.
HANDLES
Anodized ALUMINUM, knurled for better grip.
ADJUSTMENTS
Adjustable Seat by pop-pin. Regulation system by a single bolt, made of techno-polymer with a breakage index of 750 kg.
OTHER INFORMATION
2 plate supports in chromed steel, which provides more stability to the machine. Rubber endings of 20mm thickness for plates. 5 anti-slip bases.
Specifications
SKU | SRB07-E |
---|---|
Weight (kg) | 98 |
Brand | Bodytone |
Product assembly dimensions | 179cm (L) x 177cm (W) x 142cm (H) |
Warranty
Delivery & Pick Up Options