Reeplex
Custom Astro Turf 2m x 10m Sled Track For Gyms
Customise your sled track with your logo, distance lines, and more. Simply choose the size and colour, and we will contact you for the next steps. Brand your gym your way and stand out from the crowd.
How to order
1) Choose Your Turf Colour
Select the base colour for your custom turf.
2) Upload Your Logo
Supported file types: JPG, PNG, PDF (Max 20MB, 300dpi).
3) Place Your Order & Checkout Securely
Complete your purchase through our secure checkout.
4) Design Confirmation
Our team will be in touch to provide design mock-ups for your approval.
5) Production & Delivery
Once approved, we’ll process your order and provide an ETA. Delivery or store pickup options will be arranged based on your preferred location.
Turnaround 8-20 weeks from artwork confirmation.
2 x 10m Sled Track Turf Key Features
- 2m x 10m Roll ideal for pushing 2 sleds at the same time
- Material: Polyethylene (PE)
- Pile Height: 15 mm (straightened yarn length — industry standard measure)
- Installed Surface Height: approx. 6 mm above substrate
- Stitch Density: 300 stitches/meter
- Backing Composition: PP + Net + SBR Latex
- Surface Weight: 1.33 kg/m²
- Total Weight: 2.5 kg/m²
- Fire Grade: B2
Understanding Turf Thickness
Turf is measured industry-wide by pile height — the length of a single grass yarn when straightened. Because the yarn curves in its natural resting state, the installed surface sits lower than the pile height figure. Both measurements are listed above so you know exactly what you are getting.
This matters when your track runs alongside rubber gym flooring. Our rubber gym tiles are 15 mm thick and our rubber rolls are 8 mm, so turf glued directly to a concrete slab will sit lower than the surrounding floor. To achieve a flush, trip-free transition, pack the track area up with plywood before laying — 9 mm ply brings the turf level with 15 mm tiles. Against 8 mm rolls the step is much smaller, and a thin packer or a silicone edge bead is usually enough.
Installation
- Substrate: lay direct to a clean, level slab, or onto plywood where you need to finish flush with rubber flooring.
- Adhesive: allow 1 litre per 1.5 m² using a 4 mm notched trowel. The open backing weave requires more adhesive than a generic turf glue chart indicates.
- Laying: roll out dry to check alignment, then work from the centre outwards, weighting each 2 m section as you go.
- Edge finish: seal the long edges with a black silicone bead to close the joint and prevent backing fray.
- Curing: weight the track overnight and allow 24 hours before sled use.
| Box dimensions | 200cm x 40cm x 40cm Roll |
| Product Weight | 40 Kg |