Sled Track 2m x 10m Astro Turf Red

The Sled Track 2m x 10m Astro Turf Red is engineered for durability and optimal performance, providing a resilient and versatile flooring solution ideal for strength and conditioning. This premium synthetic turf features a short, high-density pile that resists crushing under weights and equipment, making it perfect for sled pushes, pulls, and various functional training exercises.

Designed with a non-slip surface, this turf ensures secure footing, even in wet or sweaty conditions, while effectively protecting your subfloor from wear and damage. Built to endure intense workouts, this sled track is an ideal investment for any commercial gym or training facility.

Key Features of Sled Track 2m x 10m Astro Turf Red

• Dimensions: 2.0 m (Width) x 10 m (Length). Extra-wide 2.0 m width accommodates dual sled use, offering ample room for two sleds side by side.
• Durable Construction: Hardwearing pile offers exceptional durability and wear resistance, with a density of 58,800 knots/m².
• Non-Slip Surface: Provides secure grip, enhancing safety during intense workouts.

Specifications

• Material: Polyethylene (PE)
• Pile Height: 15 mm (straightened yarn length — industry standard measure)
• Installed Surface Height: approx. 6 mm above substrate
• Stitch Density: 300 stitches/meter
• Backing Composition: PP + Net + SBR Latex
• Surface Weight: 1.33 kg/m²
• Total Weight: 2.5 kg/m²
• Fire Grade: B2

Understanding Turf Thickness

Turf is measured industry-wide by pile height — the length of a single grass yarn when straightened. Because the yarn curves in its natural resting state, the installed surface sits lower than the pile height figure. Both measurements are listed above so you know exactly what you are getting.

This matters when your track runs alongside rubber gym flooring. Our rubber gym tiles are 15 mm thick and our rubber rolls are 8 mm, so turf glued directly to a concrete slab will sit lower than the surrounding floor. To achieve a flush, trip-free transition, pack the track area up with plywood before laying — 9 mm ply brings the turf level with 15 mm tiles. Against 8 mm rolls the step is much smaller, and a thin packer or a silicone edge bead is usually enough.

Installation

• Substrate: lay direct to a clean, level slab, or onto plywood where you need to finish flush with rubber flooring.
• Adhesive: allow 1 litre per 1.5 m² using a 4 mm notched trowel. The open backing weave requires more adhesive than a generic turf glue chart indicates.
• Laying: roll out dry to check alignment, then work from the centre outwards, weighting each 2 m section as you go.
• Edge finish: seal the long edges with a black silicone bead to close the joint and prevent backing fray.
• Curing: weight the track overnight and allow 24 hours before sled use.